Mustang Steering Rack Efforts - Corner-Carvers Forums

Oktavius · 08-15-10, 05:18 PM

I picked up a temporary rack from Orielly's (Cardone) so that I can at least have the car moving while I get the AGR rack worked out. I pulled the plunger in the pump to check out the spring which some have mentioned shortening. My pump is from AGR and it turns out that the spring behind the plunger is a little less than the 1 7/8" which was suggested cutting to. Just to make sure, is this the spring? The photo doesn't show it well, but this one is more like 1 3/4".

08-15-10, 05:18 PM	#11
Oktavius . Join Date: Jun 2004 Location: Pensacola, FL Posts: 60	I picked up a temporary rack from Orielly's (Cardone) so that I can at least have the car moving while I get the AGR rack worked out. I pulled the plunger in the pump to check out the spring which some have mentioned shortening. My pump is from AGR and it turns out that the spring behind the plunger is a little less than the 1 7/8" which was suggested cutting to. Just to make sure, is this the spring? The photo doesn't show it well, but this one is more like 1 3/4". __________________ Tim 92GT

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode